30A 220v Smart Wifi + RF 433Mhz remote control switch for heavy load appliances AC Heater Geyser – Tuya, Smart Life App

Receiver Description:

*Voltage: AC85-265V 50/60Hz
*Power: 6600W
*Current: 30A
*WIFI frequency:2.4G. IEEE 802.11 b/g/n
*Remote control frequency: 433MHz
*Battery no included in the remote control

Preparation before use:

1.Your smart phone or tablet has connected to a 2.4G WiFi with internet
2.Turning on bluetooth helps with the connection
3.not allow to hide wifi (SSID)
4.do not set “not allow Wi-Fi squatter” or MAC address limits on routers
The intelligent switch is wired and energized.
Observe the green LED.If the green LED fast blinks(Blink twice a second),Press the button for 7s until the green LED fast blinks(Blink twice a second).
Note:
A receiver can be configured with 8 remote controllers at most, and the first one will be overwritten after the 9th one is added.

Remote control code:

1.Power off the smart switch for 5seconds
2.Power the smart switch
3.Press immediately (within 5 seconds) after energizing the switch more Three clicks on the remote control button (need to ptess that with that),the red LED flashes 2 to indicate the success of the remote control learning code .
If there is no flicker,please repeat the above operation

Product Application Area

Products can be used in homes, farms, factories, offices, laboratories, supermarkets，Garage Door and so on
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control humidifiers, microwaves, coffee machines
Remote control Taking Care for the elderly, children